Nokia
5110 Secret Codes
Unlock your Nokia
To unlock your Nokia phone you will need some of
the following:
1.
Data Cable
2.
Unlock Software
3.
Extra Help + help Guides
*#06# for checking the IMEI (International
Mobile Equipment Identity)
*#0000# for checking the phones software (SW)
- called firmware revision information.
*#746025625# [*#sim0clock#] to check if the Sim-Clock can be Stopped
(Sim-clock-stop is a kind of standby mode which will save battery time) This
code doesn't work on SW version 4.59.
*#92702689# [*#war0anty#] Warranty code.
You don't need the warranty-codes any more - you can
just scroll through the information like in any other menu. It has the the
same data as 81xx and 31xx phones (with "Edit" button for purchase
date, and "User data transfer").
*To increase call quality and decrease battery life enter
* 3 3 7 0 # (to turn back enter enter # 3 3 7 0 # .
*To decrease call quality and increase battery life enter
* 4 7 2 0 # (to turn back enter enter # 4 7 2 0 # .
*To fast find and dial phone number press
<arrow down> and then press 1st letter of name (For John - press 5.
*To quickly change phone profile press
<on/off> then again click <on/off> till choose needed profile and
then hold <on/off>.
*To get + p w while display is in
digit mode press many times * till needed letter
appears on display.
*To Check, activate or remove card restrictions
press #pw+1234567890+1 - Provider-Lock status
press #pw+1234567890+2 - Network-Lock status
press #pw+1234567890+3 - Provider(???)-Lock status
press #pw+1234567890+4 - SimCard-Lock status
1234567890(master code) is a 10 digit code, based on the phones IMEI number.
Menu:
1: Displays Serial Number.
2: Displays the Month and Year of Manufacture (0997)
3: Displays (if there) the date where the phone was purchased (MMYY)
you can here set the Purchasing Date (Warning: You can only do this once -
so be careful what you write...)
4: Displays the date of the last repair - if found (0000)
6: Transfers ALL phone numbers, pictures, sounds from one phone to another (e.g.
if broken) with 6110 u can transfer all data via IRport. (Transfer user data?)
EFR:
Enhanced Full Rate Codec (EFR):
On: Enter *3370# and EFR will be
activated after a reboot of the phone ( consumes more power )
Off: Enter #3370# and EFR will be switched off after a reboot of the phone.
Half Rate Codec:
On: Enter *4720# and Half Rate coded will be activated after a reboot
of the phone ( better standby time )
Off: Enter #4720# and Half Rate coded will be de-activated after a reboot of the
phone
Enhanced Full Rate
will give you much better sound quality when you enable it. The new Enhanced
Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear
Prediction) compression technology. This technology allows for much great voice
quality in the same number of bits as the older Full Rate CODEC. The older
technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse
Excitation). Both operate at 13 kilobits.(but you take up more space on the
network, so they can charge you more) - Talk-time is reduced with about 5%
Half Rate will give you bad sound quality, which gives the
service provider the opportunity to have more calls on the network, and you
might get a lower charge from them. - Will give you 30% longer talk-time.
PIN OUTS
Pin-Outs: Bottom view, keyboard up, counting from the left
V V 1 2 3 4 5 6 V
(o) | | [= = = = = =] | |
7 8 9 10 11 12
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
Power Button Tip:
If you press the button for a short moment, the menu with the profiles is shown
on the display.
If you press one more time, the mobile turns itself off. You can use the up and
down cursor keys
to scroll and enable a different alert setting.
The 54# Tip:
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the
phone number used for
with this key when speed dialing.
Larger Number Tip (works in 51xx series)
If you hold the key # while you are in the names list, the telephone
number can be viewed larger.
Toggle Headset and Auto settings
1) Try Connect the pin-out 1-2 (in front from the right.) to toggle headset
settings
(The phone will think that you are using a headset - "headset" is
displayed in the LCD)
2) Try Connect the pin-out 2-3 (in front from the right.) to toggle auto
settings
(The phone will think that you are using it in the car - "auto" is
displayed in the LCD)
Crazy 5110
Send a SMS full of . (dots) the it'll go crazy when you scroll the received
message in your 5110.
It doesn't do any permanent damage...it only goes crazy if you scroll the SMS.
I'm not sure if it works with all of the software version but it works with
4.59.
Doesn't work on SW version 4.53 ..
Your number in your display
1. Goto menu 3-7 Call cost settings.
2. Turn ON the Call costs' limit 3-7-1. PIN2 code Required.
3. Put in the limit with the phone number.
e.g. my phone # is 019 2184697
Enter the limit as 2184697
4. Goto menu 3-7-2 Show costs in. PIN2 code Required.
5. Select Currency.
6. Enter Unit price : 1
7. Enter Currency name as 019 (per my phone # e.g. above)
Now the phone number 019 2184697 will remains on the 4th row of the display.
Secondly, if you press the # key, it prompt which line to be used; Line 1 or 2.
Free Call Tip
NB. The tips needs Net Monitor enabled.
Be aware that the trick will remove Netmonitor in some sw versions like v4.73
and v5.04.
1 Launch the NetMonitor in your Nokia 51xx /
61xx
2 Execute the test number 497
3 Free calling for about 90 sec should now have been activated.
The trick has not been confirmed working yet
<<<Back
To Secret Codes Menu